German RepRap X400 Pro V3, Руководство пользователя

Страница: 13 / 26

X400PRO. QUICKSTART. FUNDAMENTALS.MAINTEN ANCE.TROUBLESHOOTING .
German RepRap X400 Pro V3
User Guide
Rev B01
germanreprap.us 13
>
Q. Print.
With our guidance, your first print should be done in no
time. Allow the part to cool before removing it. Use
your scraper to peel your part off the plate.
CAREFUL!
Scraper is sharp and could cut you or your build plate
tape.
Too far from the buildplate.
Too close from the buildplate.
Right distance from the buildplate.
P. Z Babystepping
Use Z Babystepping on your first layer to make sure
that it is bonding well to the plate. Turning the knob
counterclockwise moves the plate up and clockwise
moves the plate down. The first layer should be flat and
smooth with some height to it
— fettucine-like if you
will. If you are too far from the plate, your first layer will
be squiggly and will not stick to the plate. If you are too
close, the filament will extrude very little or not at all.
Position
Extruder
Fan speed
SD Card
>
3D Benchy
3DC Logo
Ctrl V Test
Profiles
>
3DCLogo.stl
3DCLogo_L_PLA_56m.f
3DCLogo_L_PLA_56m.g
>
Back
Quick Settings
Print File
Position
>
Back
Home all
Z Babystepping
0.0mm
Speed mul. : 100%
>
Counterclockwise moves
up. Clockwise moves
down.
Z baby step buildplate
AFTER starting print!