germanreprap.us 25
Rev B01
X400PRO.QUICKSTART.FUNDAMENTALS.MAINTENANCE.TROUBLESHOOTING.
German RepRap X400 Pro V3
User Guide
The latest version of the firmware, from the release of
this document, is
3.2.
A.1.
If you have not done so already, download the Ar-
duino Software
here.
A.2.
Download the latest version of the Firmware
here
.
Open the zip folder and drag the folder onto your desk-
top.
A.3.
Open the folder ’X400 GRR 3.2 DD3 Dual’ and
then open the folder ’Repetier’. Double click on the
“Repetier.ino” (Arduino Source Code) file. Not to be
confused with “Repetier.h”.
A.4.
Go to Tools
—
> Serial Port and make note of the
COM ports that are displayed.
A.5.
Plug the USB Cable into a USB 3.0 Port on your
computer and into the backside of the x400 Pro V3.
A.6.
Go to Tools
—
> Serial Port and select the new
COM port listed. It should be the only COM Port that
was not there the first time you checked.
A.7.
Go to Tools
—
> Board and make sure that the
“Arduino Mega 2560 or Mega ADK” is selected.
A.8.
Click the check mark icon to Verify the firmware.
Then click the arrow icon to Upload the new firmware.
Updating Fir mwar e
A.9.
Once the firmware is done uploading, unplug the
USB from the printer.
A.10.
Power cycle the printer and watch the LCD to
ensure the newly uploaded firmware number flashes in
the startup menu.
Содержание X400 Pro V3
Страница 1: ...German RepRap X400 Pro V3 User Guide...
