German RepRap X400 Pro V3, Руководство пользователя

Страница: 10 / 26

X400PRO. QUICKSTART. FUNDAMENTALS.MAINTEN ANCE.TROUBLESHOOTING .
German RepRap X400 Pro V3
User Guide
Rev B01
germanreprap.us 10
M.3. Turn off X and Y Motors. Using the control pan-
el (from last step):
Back — > Quick Settings — > Disable Steppers.
M.4. Manually move the printing head close to each
holding point above the adjusting screws. Loosen or
tighten screw until the gap between the nozzle and plate
is about the thickness of your feeler gauge.
M.5. Check the center and other random positions on
the plate. Adjust accordingly.
Home all
Home X
Home Y
Home Z
>
Back
Home all
Home X
Home Y
>
Back
Quick Settings
Print File
Position
>
Preheat ABS
Cooldown
Set to origin
Disable steppers
>
We have chosen to preheat the whole machine for two
reasons. First, it is best practice to level the buildplate
while it is hot. Second, it’s a time saving trick that allows
us to do other things while our extruders heat up.
Preheating heats all parts
simultaneously.
L.1. Using control panel:
Button press — > Quick Settings — > Preheat PLA.
Back
Quick Settings
Print File
Position
>
Speed mul.: 100%
Flow mul.: 100 %
Change filament
Preheat PLA
>
M. Level buildplate.
Follow these step to level your buildplate. The most
common problems in 3D printing stem from an un-
leveled buildplate, so it is important to do this step cor-
rectly.
M.1. Heat up print bed (Should be heating up thanks to
the last step!).
M.2. Home Z axis. Using the control panel:
Button Press — > Position — > Home Z.
Back
Quick Settings
Print File
Position
>