Gericom SilverSeraph CL10, Руководство пользователя

Страница: 136 / 150

136
The printer will not print what you see on the screen
Many programs display information on the screen differently from
the way they print it. See if your program has a print preview
mode. This mode lets you see your work exactly as it will print.
Contact the software manufacturer for more information.
Modem Problems
This section lists common modem problems.
The modem will not receive or transmit properly
Make sure the RJ-11 cable (the one that goes from the modem to
the telephone line) is firmly connected to the modem’s RJ-11
jack and the telephone line socket.
Check the serial port settings to make sure the hardware and
software are referring to the same COM port (look in Device
Manager under Modems for the PC Card modem).
Check the communications parameters (baud rate, parity, data
length and stop bits) specified in the communications program. It
should be set up to transmit at 300, 1200, 2400, 4800, 9600,
14400, 28800, 33600, 56000 bps (bits per second) or higher.
Refer to the program’s documentation for information on how to
change these settings.
The modem is on, set up properly and still not transmit
or receive data
Make sure the line has a dial tone. Connect a telephone handset
to the line to check this.
The other system may be busy or offline. Try making a test
transmission to someone else.