134
Hot swapping (removing one PC Card and inserting
another without turning the computer off) fails
Follow this procedure before you remove a PC Card:
1.
Click the
PC Card
icon on the taskbar.
2.
Click
Stop xxxx,
where
xxxx
is the identifier for your PC
Card.
Windows
®
operating system displays a message that you may
safely remove the card.
3.
Remove the card from the slot.
The system does not recognize your PC Card or
PCMCIA socket controller
This problem may be caused by a low battery. Replace the
battery with a fully-charged one or charge the battery fully as
follows:
1.
Make sure the computer is not in Standby.
2.
Turn off the computer.
3.
Connect the AC adapter and power cable.
4.
Keep the computer plugged in for about seven hours with the
power turned off.
If power is not the problem, try removing the card, inserting it
again, and reinstalling it using the procedure in “Inserting PC
Cards”.
The problem may also be caused by a conflict with any additional
memory in your system. If you recently installed a memory
expansion card, turn off the computer, remove the memory, turn
on the computer and try the PC Card again.
Содержание SilverSeraph CL10
