manualshive.com logo in svg

GeoVision GV-Video Server, Руководство пользователя, Страница: 70 / 179

Поделиться
Скачать
GeoVision GV-Video Server Скачать руководство пользователя страница 70

 

 

62 

4.3.5  GV-GIS   

Note the GV-GIS with two connections is only available on 

GV-VS04A

, 

GV-VS04H

 

(Firmware Version 1.03 or later) and 

GV-VS12 

(Firmware Version 1.02 or later). 

 

Through the Internet connection, the GV-Video Server with enabled-GPS function can 
send GPS data and live video to the GV-GIS geographic information system for the 
services of vehicle tracking, location verification and live monitoring. The GV-Video Server 
can connect up to two GV-GIS systems simultaneously.  

 

Before you configure the GV-GIS connection on this setting page, the following conditions 
must be met: 

•

 

A subscriber account created on the GV-GIS (For details on the GV-GIS geographic 
information system, see 

GV-GIS User’s Manual

) 

•

 

UMTS mobile connection activated on the GV-Video Server (See

 4.7.4 UMTS

) 

•

 

GPS function activated on the GV-Video Server (See 

4.2.3 GPS/Wiegand

) 

 

 

                                           

Figure 4-23 

Содержание GV-Video Server




















































































































































































Отзывы:

Нет отзывов