Trunking
37
13
z
System Priority:
This column allows you to enable or disable Loopback Detection
function.
z
Link Aggregation Algorithm:
MAC Src:
Hash Algorithm based on Source MAC Address.
MAC Src&Dst:
Hash Algorithm based on Source & Destination MAC Address XOR
result.
z
Member:
This column allows you to select the member Ports.
z
Status:
This column allows you to Enable/Disable the Trunk Group.
z
Type:
This column allows you to choose
Static
Trunking or Dynamic
LACP
Trunking.
After Select the
LACP
Trunk type, the following parameters can be configured. Noted that
the parameters of the both ends of the LACP should be the same.
z
Operation Key:
This column allows you to type operation key.
z
Time Out:
This column allows you to select
Long Time Out
Time or
Short Time Out
Time. The Long Time Out is around 30 seconds. The Short Time Out is around 3 seconds.
However, the link partner of other supplier may not use the same value. The longer time
then will be used.
z
Activity:
This column allows you to select
Passive
or
Active
mode.
Note:
If you enable LACP on some specified ports and their link partners are normal port
without LACP, these specified ports cannot transmit packet to/receive packet from the link
partner.
