24
VLAN Member in Tag Based Mode
In Tag Based Mode you need to define and configure your VLAN groups. Assign the VLAN ID,
select the VLAN member ports, assign the PVID and check the configuration result.
Figure
8-4
z
VLAN ID (VID):
Since you want the handover to other switches take place smoothly, the VLAN IDs (Numbers)
need to be like on the rest of your network. (On other switches you may have the chance to
configure names. These are just for your reference. Only the numbers are important!)
Figure 8-5
Add:
Enter a VID, select the VLAN member for this entry and then press the
ADD
button to add a VLAN entry to the table. The available range of VID is from 1-4094.
Delete:
Select a VID in the table and then press the
Delete
button to remove a VID
entry from the table. After deleted, the VLAN and its member port setting is gone.
Update:
Modify the existing VLAN setting. Select the VID, the below settings will be
displayed, you can change the settings and then press the
Update
button to update
the settings.
