Port Management
19
7
Bandwidth Control
This page allows the setting of the bandwidth for each port. The TX rate and RX rate can be
filled with the number ranging from 1 to 255. This number should be multiplied by the selected
bandwidth resolution to get the actual bandwidth.
Figure
7-3
z
Port No.:
Select the port number you want to configure.
z
TX Rate:
Type the TX Rate value. The value is range from 0-255.
z
RX Rate:
Type the RX Rate value. The value is range from 0-255.
z
Speed Base:
Low: step by 32 Kbps. High: step by 256Kbps for Fast Ethernet Ports. 2048
Kbps for Gigabit Ports.
Click
Update
to have the configuration take effect.
Example: Type 5 for both TX and RX Rate and select the High as speed base for port 1 and
port 10. The actual rate for port 1 (Fast Ethernet) is "1280", for port 9 (Gigabit Port) is 10240.
You could see the table is updated as below.
Figure
7-4
