Sharpness:
Adjusts the sharpness of the image.
Gamma:
Adjusts the relative proportions of bright and dark areas.
White balance:
The camera automatically adjusts the color to be closest to the image
you are viewing. You can choose one of the three presets:
Indoor, Fluorescent
, and
Outdoor
. You can also choose
Manual
to adjust the white balance manually.
Flicker less:
The camera automatically matches the frequency of your camera’s imager
to the frequency of indoor light sources, e.g. fluorescent lighting. You can also select 50
Hz or 60 Hz manually. If these don’t match, faint light and dark bars may appear in your
images. Check the power utility to determine which frequency is used.
Image Orientation:
Changes the image orientation on the Live View window.
Slowest Shutter Speed:
The shortest duration that
the image sensor is exposed to light.
Under low light conditions, a faster shutter speed will lower color quality and image
clarity. For manual shutter speed, the options are between 1/5 and 1/8000 sec. Select
Auto
for automatic shutter speed or select
Auto (Higher Shutter Speed)
for faster
automatic shutter control.
Shutter
Speed
Balanced Quality
Image Brightness
Poor
Good
Excellent
Image Clarity
Poor
Good
Excellent
Image Smoothness
Excellent
Good
Poor
D/N:
Sets the Day/Night mode of the camera. When Auto is selected, you can use the
slider to adjust the sensitivity level of the light sensor. The higher the value, the more
sensitive the camera is to light. The D/N function is not available GV-FE421 with
firmware version 1.02 or earlier. For details, see
4.1.1 Video Settings
.
Denoise:
Reduces image noise especially under low-light conditions. The higher the
denoise value, the stronger the effect.
Wide Dynamic Range:
adjusts and generates clear live view when the scene contains
very bright and very dark areas at the same time. Select
Auto (Strong)
to bring out
details in the darks areas of the scene, select
Auto (Weak)
to bring out less detail in the
dark area and at the same time keep the bright areas from overexposure, or select
Auto
(Normal)
for a balanced effect. Select
Close
to disable the function.
Defog:
Select
Auto
to automatically enhance the visibility of images. Select
Close
to
disable the function.
Metering:
Controls the camera’s exposure. Select
Normal
for the camera to adjust
exposure based on the full live view. Select
Regional Metering
for the camera to adjust
exposure of specified zones. Draw directly on the live view and a block marked with “AE
56
