Keep days (1-255):
Specify the number of days to keep the files from 1 day to 255
days. When both
Keep days
and
Enable recycling
are selected, the system applies
whichever condition comes first. For example, if the specified smallest amount of
storage space comes earlier than the designated keep days, then recycle is applied
first.
Enable debug message to the storage:
Debug message (see
4.8.5 Log Information
)
is deleted after reboot. Select this option to store log information to the attached
storage device.
Enable auto formatting when disk or partition is enable to record:
Select this
option for the camera to automatically format the storage device when there is error
during recording.
[Disk Information]
This section shows the details of the attached storage devices. Use the
Format
or
Remove
button to format or unload a storage device. For detail steps, see
Partition
Information
below.
[Partition Information]
This section shows the partition details of the attached storage devices.
To add a memory card:
1. Insert the memory card to the camera.
2. Click
the
Format
button.
3. After the format is complete, the partition information will display. The maximum space
for one partition is 200
GB.
To remove a memory card:
1. Click
the
Remove
button.
2. When you are prompted to confirm the action, click
Yes
. The page will be refreshed
and the partition information will be cleaned.
3. Remove the memory card from the camera.
122
