Introduction
35
1
Assembling the Power Adapter (Optional)
1. Insert the supplied power cable into the supplied waterproof rubber and plug it into the
camera.
Figure 1-3
2
2. Insert the power cable into the supplied female terminal block as illustrated and plug it
into the terminal block connector in the camera.
Figure 1-3
3
3. Insert the power wires at the other end into the male terminal block as illustrated and
plug it to the power adapter.
DC 12V
Power Adapter
Terminal Block
Female Terminal Block
(Connect to Camera)
Male Female
Figure 1-3
4
Note:
Power adapter can be purchased upon request.
