Introduction
1
8. Thread the Ethernet cable through the PG21 conduit connector and the wall mount box
as shown in No. 8,
Figure 1-51
.
9. Rotate the plastic ring to secure the conduit connector to the wall mount box. Screw in
the cap as shown in No. 9,
Figure 1-51
.
10. Plug the Ethernet cable to the RJ-45 connector of the camera as shown in No. 10,
Figure
1-49
. To waterproof the Ethernet cable, see
1.6 Waterproofing the Cable
.
11. Arrange the cables.
12. Screw the wall mount box cover to the wall mount box as shown in No. 12,
Figure 1-51
.
Figure 1-51
35
