GeoVision EFER3700-W Скачать руководство пользователя страница 69

Страница: 69 / 209

Introduction

1.7.5 GV-FER5700 / 5701 / 12203 / 12700

ter, WiFi adapter or USB hard drive, microphone, speaker, and any I/O

devices.

GV-FER5700 / 5701 / 12203 / 12700 comes with a data cable that allows you to connect to

the power adap

Figure 1-68

Note:

AC 24V is not supported by GV-FER5700 / 5701 / 12700.

GV-FER12203 does not support the wireless function.

Connecting to Power

er to the camera:



Use a Power over Ethernet (PoE) adapter to connect the camera to the network, and

the power will be provided at the same time.



Plug the power adapter to the terminal block on the data cable.

Connecting to I/O Devices

For details, see the same topic in

1.7.6 GV-EFER3700 / EFER3700-W

There are two ways to supply pow

Содержание EFER3700-W


















































































































































































































Результаты поиска

Содержание EFER3700-W

Отзывы:

GeoVision EFER3700-W, Руководство пользователя, Страница: 69 / 209

Результаты поиска

Содержание EFER3700-W

Отзывы: