GeoVision EFER3700-W, Руководство пользователя, Страница: 65 / 209

Introduction
1
1.7.3 Connecting PoE Converter and IR LED Ring for GV-FE3403 /
5303
To install a PoE converter, follow the steps below.
Note: Instead of installing the PoE converter, you can connect the camera to a PoE switch
and the IR LED ring with a power adapter (optional accessory).
Figure 1-60
Connect the PoE converter to a PoE switch with a standard network cable. Use the
RJ-45 connector on the left.
1.
verter, use a standard network cable without
t the wrong devices to the two RJ-45
Note:
1. Due to limited space inside the PoE con
the rubber boot.
2. The camera will not work if you connec
connectors on the PoE converter.
2 -45 . Connect PoE Converter and the camera with the supplied network cable. Use the RJ
connector on the right.
51