GeoVision EFER3700-W, Руководство пользователя, Страница: 145 / 209

Administrator Mode
4
[Optional Network Type]
According to the network environment, select Wired Ethernet or Wireless . Before enabling
the Wireless option, follow the steps in 2.1.3 Configuring the Wireless Connection to
configure the wireless settings first.
[LAN Configuration]
 Dynamic IP address: The network environment has a DHCP server which will
automatically assign a dynamic IP address to the camera. Click the Test DHCP to see
the currently assigned IP address or look up the address using GV-IP Device Utility.
 Static IP address: Assign a static IP or fixed IP to the camera. Type the camera’s IP
address, Subnet Mask, Router/Gateway, Primary DNS server and Secondary DNS
server.
Parameters Default
IP address 192.168.0.10
Subnet Mask 255.255.255.0
Router/Gateway 192.168.0.1
Primary DNS server 192.168.0.1
Secondary DNS server 192.168.0.2

PPPoE: The network environment is xDSL connection. Type the Username and
Password provided by ISP to establish the connection. If you use the xDSL connection
with dynamic IP addresses, first use the DDNS function to obtain a domain name linking
to the camera’s changing IP address.
[IPv6 Settings] Select Enable IPv6 and click Apply to enable this function. Note this
function is only available for GV-FER5700 / 5701 and GV-EFER3700 Series .
 Dynamic IP address: The network environment has a DHCP server which will
automatically assign a dynamic IP address to the camera.

Static IP address: Assign a static IP or fixed IP to the camera and fill out the required
settings.
Note: To enable this function, make sure your network environment and hardware
specifications support IPv6.
For details on Dynamic DNS Server Settings , see 4.7.2 Advanced TCP/IP.
131