GeoVision EFER3700-W, Руководство пользователя, Страница: 140 / 209

[Camera Status Icon]
: On standby : Recording is on.
: Enabled for motion detection and input trigger
[Recording Settings] Note this function is only supported by GV-FER5700 / 5701 / 12203 /
12700 and EFER3700 Series . Configure recording settings for motion and I/O events, and
the condition to record.

Pre-alarm recording time: Activates video recording before an event occurs. Set the
recording time to 1 or 2 seconds. The recording is saved in the buffer of the camera.

Post-alarm recording time: Activates video recording onto the inserted memory card
after an event occurs. Set the recording time from 1 to 30 seconds.

Split-interval: Sets the time length between each event file from 1 to 5 minutes.

Recording Profile: This setting is only applicable for recording to the camera’s memory
card. Select Performance to maximize the lifespan of the memory card by restricting the
frame rate to 30 fps and maximum bit rate to 4 Mbps. Select Quality to adopt your
current settings. The default setting is Performance .

Record audio: Activates audio recording when an event occurs.

Recording Policy: By default, the camera will only record to the memory card when the
camera is not streaming live view to other applications (e.g. GV-VMS) or Web browser.
Alternatively, you can set the camera to always record to the memory card as a
secondary backup.
Note: When the camera is recording to the memory card, it is recommended to connect no
more than two connections to the camera using Web interface or other applications

Encryption: Stores the recordings as encrypted files that can only be played back by
GV-Remote ViewLog player. For details on playback, see 5.2.2 Playback over Network .
Figure 4-23-2
126