ASSEMBLY OF THE MAXI PRESS AIR
TWIN RIGID STATION SHUTTLE
The Twin Rigid Station Shuttle is designed to allow the operator to unload and reload one
table while another table is being pressed. The two tables are independent allowing indexing
only when needed. Indexing is performed by simply manually moving the station in the desired
direction. The assembly is basically made up of (5) major parts. They are:
•
MID RAIL SECTION
•
LEFT RAIL SECTION
•
RIGHT RAIL SECTION
•
LEFT LOADING TABLE
•
RIGHT LOADING TABLE
FULLY ASSEMBLED RIGHT SIDE SHUTTLE SECTION
UNPACKING:
Your machine was shipped in two main crates. One crate has the main MAXI
PRESS AIR with one of the loading tables mounted under the heater block. The 2
nd
crate
contains the other loading table with both the left and right rail sections. Completely unpack and
remove all components. !CAUTION! When removing 4” X 4” wood timbers use a clamp or
other person to prevent accidental movement and damage to the rolling loading table. Especially
when assembling the left & right rails or moving the machine, use caution that the first loading
table on the machine can not roll off the press.
RIGHT SIDE
LOAD VEHICLE
RIGHT SIDE
STOP END
TUBE
RIGHT SIDE
RAIL
SECTION
RIGHT SIDE
FRONT HANDLE
Содержание Maxi Press Air
Страница 1: ...MAXI PRESS AIR OWNERS MANUAL REV 10 2010...
