Geo Knight Maxi Press Air, Руководство пользователя

Страница: 10 / 13

•
MAIN TEFLON SHUTTLE FRAME: This is the large aluminum rectangle frame that
shuttles back and forth on the Base Roller Frame Assembly. The Teflon blanket is attached to
this moving shuttle frame. The assembly is made up of 2 long Front & Rear Aluminum
Angles and 2 shorter Right & Left End Tubes. The long Front and Rear angles have 1” x 1”
aluminum bars attached. It is these aluminum rail bars that will roll between the cam rollers
on the Roller Frame assembly (see picture below). First roll the long front and rear angles
into the front and rear Roller Frame, then attach the left and right end tubes.
NOTE: The left
and right end tubes that are attached to the front and rear angles are attached to the
TOP SIDE of the angles.
Once this assembly is attached properly, this Teflon Shuttle
Frame will roll freely left and right on the lower Base Roller Frame Assembly.
.
The bolts attaching the Left & Right end tubes lower roller frame may need to be
loosened & then tightened while spreading the angles to insure a smooth & tight rolling fit of the
Main Teflon Shuttle Frame on the Base Roller Frame Assembly.
2” X 4” STEEL
STAND FRAME
TUBING
SHUTTLE FRAME
LONG ALUMINUM
ANGLE
1” X 1” ALUMINUM
ROLLER BAR
BASE ROLLER FRAME
ASSEMBLY-LEFT SIDE