TEFLON BLANKET SUPPORT OUT-RIGGER TABLES:
The Teflon blanket support out-
riggers are welded assemblies that are attached to the left side and the right side of the Maxi
Press Air. These assemblies support the Teflon blanket and materials being loaded & unloaded
on it when it is shuttled to the left or right. It is made of (2) components, the welded structure
with adjustable legs and the top aluminum tray. The out-riggers are attached to the left side of the
lower roller frame assembly. Three screws are used to screw up from under the “left” side tube
too the 3 tapped standoffs welded to the end of the out–rigger. Once attached, adjust the feet so
the assembly is level.
LEFT SIDE OUT-
RIGGER SUPPORT
TABLE WELDED
ATTACHMENT
POINTS TO LEFT
SIDE LOWER
ROLLER FRAME
ADJUSTABLE FEET
TO LEVEL ASSEMBLY
ALUMINUM SHEETS ATTACHED
TO THE OUT-RIGGERS ONCE
ATTACHED. SCREWS FASTEN
THE ALUMINUM SHEET TO EACH
OUT-RIGGER VIA ALUMINUM
ANGLES WELDED TO THE TIN
AND SCREWS THAT SCREW
INTO THE 1” X 1” STEEL
Содержание Maxi Press Air
Страница 1: ...MAXI PRESS AIR OWNERS MANUAL REV 10 2010...
