Genvex ECO 375 TL, Руководство по установке

Страница: 9 / 20

9
G4 = Standard filter (coarse filter class G4)
F7 = Pollen filter (fine filter class F7)
M5 = Fine Filter (fine filter class M5)
Maintenance of ventilation unit
Turn off the electricity for the unit before
opening it.
Filters
When the filter timer reaches the set value for filter
change, “Alarm!” will show in the screen saver and ”Chg.
filter” will flash. This means that it is time to clean/
change the filters.
Switch the unit off on the switch on the control panel
or the switch on the electrical panel. Open the front
doors and remove the filters. When the filters have been
cleaned/replaced, close the front doors and reset the
filter alarm by holding down the button below the filter
symbol, until ”Alarm!”, “Chg. Filter” and the exclamation
mark disappears in the filter symbol. The unit reverts to
normal operation.
If the wish is another time interval, this can be adjusted
in the user menu.
Do not vacuum or clean at high air pressure. It will
damage the filter!