Genovation
Page 19 of 45
midipc
In order to send a Preset to the keypad, simply send it at any time from your PC.
The keypad does not have to be configured to receive Sys Ex (assuming you
have already set the correct device IDs).
Set Patch Range
You can set the range for the Patch Change values to be 1-128 or 0-127.
Underneath, the firmware always transmits the hex values according to the MIDI
Spec. (0x00 to 0x7F), but most MIDI gear uses 1 to 128 for patches.
You can modify the value using the Up and Down arrow keys or the 0 and 1
keys. Press Enter once you have made your selection.
Set Bank Select Range
You can set the range for the Bank Select MSB and LSB values to be 1-128 or 0-
127. Underneath, the firmware always transmits the hex values according to the
MIDI Spec (0x00 to 0x7F), but most MIDI gear uses 0 to 127 for bank selects.
You can modify the value using the Up and Down arrow keys or the 0 and 1
keys. Press Enter once you have made your selection.
