Genovation
Page 16 of 45
midipc
the cursor is flashing on it’s position, then you can modify the value using either
the arrow keys or typing a new value on the keypad.
MAN MODE takes on the role of PATCH CHANGE. It moves the cursor to the
Patch Change value if the cursor is not there already. If it is, then MAN MODE
enables/disables it. If the Patch Change is enabled and the cursor is flashing on
it’s position, then you can modify the value using either the arrow keys or typing a
new value on the keypad.
Editing the Name
Press PRE MODE again and you will be prompted for the name you wish to
assign to the Preset. The LCD screen shows
N?:
to indicate that it is in name
editing mode.
Use the UP and DOWN arrow keys to change each character value (see table).
ENTER moves the cursor to the right and CLEAR moves it to the left.
LCD character table
