Genovation
Page 10 of 45
midipc
2: Manual Mode
In Manual Mode you can send one, two or all three of the following standard MIDI
messages on the MIDI channel of your choosing:
Program Change (always transmitted)
Bank Select MSB - Controller number 0 (optionally transmitted)
Bank Select LSB - Controller number 32 (optionally transmitted)
The LCD will show what the current patch value is and what components are
enabled or disabled. If one or both of the Bank Selects is disabled (muted), then
the LCD will show “
···
“
next to the name on the LCD. For instance, on the
LCD shown below, the Bank MSB is not enabled, the Bank LSB value is
25 and the Program Change value is 34
1
.
MIDI Channel
Once you have your cables hooked up, the first
thing you should do is set the MIDI channel used
for manual mode. This is done by pressing the
MIDI CH key and using the Up or Down arrow
keys to scroll to the channel you want (1 to 16).
Alternatively you can erase the displayed value
using the CLEAR key and then type in the
1
There is a Utility Menu item for setting the number range to either 0-127 or 1-128 for both
Program Change and Bank Select but it is recommended at this time to stay with the defaults.
