Genovation
Page 11 of 45
midipc
channel you want and then press ENTER.
Press ENTER to save your new MIDI channel number. You can abandon your
changes by pressing MIDI CH a second time. The MIDI Channel value will be
retained even if power is lost.
Enable/Disable Banks Select(s)
The Bank Select MSB and Bank Select LSB can be enabled and disabled by
repeated depressing of their respective keys.
When the Bank Select is disabled (muted), the three dots appear: “
···
“. When the
value is being editing the cursor is flashing over the value being edited. When the
value is solid then the value is enabled for transmitting. Normally, when not
editing a bank value, the cursor is flashing over the program change value at the
far right of the LCD since this is the value you will be changing most often.
To Change a Bank Value Without Sending
This allows you to establish what patch you want to send, but not send it yet.
Press one of the Bank Select keys until you are in the edit mode (cursor flashing
on the bank value). Enter the new value for the Bank Select using the number
keys. Press the same Bank Select key again (do NOT press Enter). This
changes the value on the display but does not transmit anything.
To Change a Bank Value With Sending
To Edit a Bank Select and send it immediately (along with the current Patch
value), press one of the Bank Select keys until you are in the edit mode (cursor
flashing on the bank value). Enter the new value for the Bank Select using the
number keys. Press Enter.
