Genovation
Page 15 of 45
midipc
4: Editing Presets (on the keypad)
You can edit the individual Presets on the device or by sending new values using
System Exclusive. To edit a preset on the device, while in Preset Mode, press
PRE MODE (again). You will asked to verify that you want to edit the current
preset:
Press ENTER to confirm or CLEAR to go back to the previous Preset. In Edit
Preset mode the LCD screen information starts with the letter E.
You can cycle through the various edit screens using the PRE MODE key.
Sub-menu
Navigation
PRE MODE
Edit Patch Change Data
Edit Name
View Arbitrary MIDI Data
Save Preset Confirm
Modifying the Preset
2
In Preset Edit mode, the editing is similar to the Manual Mode.
MIDI CH lets you scroll through the list of 16 MIDI channels and on each one you
can assign a Bank Select MSB and/or a Bank Select LSB and/or a Patch Change
value.
Bank MSB moves the cursor to the Bank Select MSB if the cursor is not there
already. If it is, then it enables/disables it. If the Bank Select MSB is enabled and
the cursor is flashing on it’s position, then you can modify the value using either
the arrow keys or typing a new value on the keypad.
Bank LSB moves the cursor to the Bank Select LSB if the cursor is not there
already. If it is, then it enables/disables it. If the Bank Select LSB is enabled and
2
There is no method currently to modify the arbitrary MIDI data field on the keypad.
