Genovation
Page 13 of 45
midipc
3: Preset Mode
Preset mode allows you to pre-configure the keypad for performance situations
where you need to change patches on a lot of gear with minimum fuss. In this
mode you can set up to 16 patch/bank changes per preset (one per MIDI
channel). Of course you will need to set these values up ahead of time. This is
normally accomplished by sending System Exclusive dumps (see Appendix A for
a description of the System Exclusive implementation.
There are 100 presets (01-100) and you can move through them using the
number pad or with the arrow keys.
The number on the left indicates the preset number. The user name for the patch
is shown on the right. It consists of (up to) thirteen ASCII characters.
Each time a new preset is selected the keypad can transmit any or all of the
following information:
MIDI
Channel
Bank Select
MSB
Bank Select
LSB
Program
Change
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Each component (blank square above) can contain a value (0-127 or 1-128) or it
may be disabled. Disabled values actually contain the number 255. See the
System Exclusive implementation in Appendix A for more information.
