Genie Z-45 XC, Руководство по обслуживанию

Страница: 89 / 440

Part No. 52709 Genie Z-45/25 & Genie Z-45/25J 4 - 59
First Edition • Second Printing Section 4 • Scheduled Maintenance Procedures
TABLE C PROCEDURES
12 Clean up any coolant that may have spilled
during this procedure.
13 Start the engine from the ground controls and
let it run for 30 seconds. Turn the engine off
and inspect for leaks.
14 Check the coolant level in the coolant return
tank. Add coolant if needed.
15 Swing the engine back to its original position
and close the engine pivot plate latch.
16 Install the engine pivot plate safety pin
(if equipped).
17 Start the engine from the ground controls
and let it run until it reaches normal operating
temperature.
18 Turn the engine off. Allow the engine to cool.
19 Check the coolant level in the coolant return
tank. Add coolant if needed.
Coolant capacity
Ford Gasoline/LPG Engine 11.5 quarts 10.9 liters
Perkins 104-22 Engine 6.3 quarts 6 liters
C-5
Check the Engine Valve
Clearances -
Perkins Diesel Models
Engine specifications require
that this procedure be performed
every 600 hours.
Complete information to perform this procedure is
available in the
Perkins Workshop Manual ,
Perkins part number TPD 1378
(Genie part number 72352).