Genie Z-45 XC, Руководство по обслуживанию

Страница: 61 / 440

Part No. 52709 Genie Z-45/25 & Genie Z-45/25J 4 - 31
First Edition • Second Printing Section 4 • Scheduled Maintenance Procedures
TABLE B PROCEDURES
2 Open the engine pivot plate latch and swing the
engine pivot plate out and away from the
machine.
3 Inspect the radiator for leaks and physical
damage.
4 Clean the radiator fins of debris and foreign
materials.
5 Inspect all radiator hoses and connections.
6 Swing the engine back to its original position
and close the engine pivot plate latch.
7 Install the engine pivot plate safety pin
(if equipped).
8 Replace the air baffle and install the air baffle
retaining fasteners.
B-4
Check the Exhaust System
Maintaining the exhaust system is essential to
good engine performance and service life. Running
the engine with a damaged or leaking exhaust
system can cause component damage and unsafe
operating conditions.
Bodily injury hazard. Do not
inspect while the engine is
running. Remove the key to
secure from operation.
Burn hazard. Beware of hot
engine components. Contact with
hot engine components may result
in severe burns.
1 Ford models: Remove the safety pin (if
equipped) from the engine pivot plate latch.
The engine pivot plate latch is
located under the engine turntable
pivot plate at the counterweight
end of the machine.
2 Open the engine pivot plate latch and swing the
engine pivot plate out and away from the
machine to access the exhaust system.
3 All models: Be sure that all nuts and bolts are
tight.
4 Inspect all welds for cracks.
5 Inspect for exhaust leaks; i.e., carbon buildup
around seams and joints.
6 Ford models: Swing the engine back to its
original position and close the engine pivot
plate latch.
7 Install the engine pivot plate safety pin
(if equipped).