Genie Z-45 XC Скачать руководство пользователя страница 47

Страница: 47 / 440

Part No. 52709

Genie Z-45/25 & Genie Z-45/25J

4 - 17

First Edition • Second Printing

Section 4 • Scheduled Maintenance Procedures

3 Manually activate the drive enable limit switch.

Result: The drive enable limit switch roller

should move freely and spring return to center.
A distinct click should be felt and heard.

4 Start the engine from the platform controls.

Result: The drive enable indicator light should

be on.

5 Move the lift/drive select switch to the lift

position (if equipped).

6 Press down the foot switch. Then rotate the

turntable until the primary boom is in between
the non-steer tires.

Result: The drive enable indicator light should

be off.

7 Move the lift/drive select switch to the drive

position (if equipped).

8 Press down the foot switch and slowly move the

drive control handle off center.

Result: The drive function should operate.

9 Move the lift/drive select switch to the lift

position (if equipped).

10 Press down the foot switch and rotate the

turntable to the left until the boom is past the
left non-steer wheel.

Result: The drive enable indicator light should

be on.

11 Move the lift/drive select switch to the drive

position (if equipped).

12 Press down the foot switch and slowly move the

drive control handle off center.

Result: Drive function should not operate.

13 Move and hold the drive enable toggle switch to

either side and slowly move the drive control
handle off center.

Result: Drive function should operate.

14 Move the lift/drive select switch to the lift

position (if equipped).

15 Press down the foot switch and rotate the

turntable to the right until the boom is past the
right non-steer wheel.

Result: The drive enable indicator light should

be on.

16 Rotate the turntable to the left until the boom is

past the left non-steer wheel.

Result: The drive enable indicator light should

be on.

17 Move the lift/drive select switch to the drive

position (if equipped).

18 Press down the foot switch and slowly move the

drive control handle off center.

Result: Drive function should not operate.

19 Move and hold the drive enable toggle switch to

either side and slowly move the drive control
handle off center.

Result: Drive function should operate.

TABLE

PROCEDURES

Содержание Z-45 XC

























































































































































































































































































































































































































































Результаты поиска

Содержание Z-45 XC

Отзывы:

Бренды по названию

Популярные бренды

Genie Z-45 XC, Руководство по обслуживанию

Результаты поиска

Содержание Z-45 XC

Отзывы:

Бренды по названию

Популярные бренды