Genie X-135/70, Руководство оператора

Страница: 51 / 71

First Edition • Seventh Printing Operator's Manual
Operating Instructions
Part No. 160567 ZX-135/70 49
Starting the Engine
1 At the ground controls, turn the key switch to
the desired position.
2 Be sure both ground and platform control red
Emergency Stop buttons are pulled out to the
on position.
Deutz models
1 Diesel models with glow plug button: Push the
glow plug button.
Diesel models with automatic glow plugs:
Amber light will be on when glow plugs are on.
2 Move the engine start toggle switch
to either side. The engine start
switch can be moved at any time
while the glow plugs are on. If the
engine fails to start or dies, the
restart delay will disable the start
switch for 3 seconds.
Perkins models
1 Move the glow plug switch to either side and
hold.
2 Move the engine start toggle switch to either
side. If the engine fails to start or dies, the
restart delay will disable the start switch for
3 seconds.
If the engine fails to start after 15 seconds of
cranking, determine the cause and repair any
malfunction. Wait 60 seconds before trying to start
again.
In cold conditions, 20°F / -6°C and below, warm
the engine for 5 minutes before operating to
prevent hydraulic system damage.
In extreme cold conditions, 0°F / -18°C and below,
machines should be equipped with optional cold
start kits. Attempting to start the engine when
temperatures are below 0°F / -18°C may require
the use of a booster battery.
If the machine is stored for long
periods of time in low
temperatures (below 32°F / 0°C)
with the secondary boom raised
and extended, the engine may
not start due to system fault.
To remove the fault, move and hold the emergency
power switch and activate the secondary boom up
function until the secondary boom begins
extending.