2
Setting Up a PIN
Program key
Program key
For multiple doors only
Program key
Program key
Up/Down Key
Program key
Programming the Opener
Locate
Y
our Opener
’
s Programming Buttons and LED
New Genie
®
Openers
Other New Model Genie
®
Openers:
Synchronizing Keypad to Opener
Synchronizing Keypad to Opener
Program Set key
NOTE:
The Learn Code button and LED may be located under the light lens
or you may have to remove your unit's cover
.
or
r
o
r
o
RADIO
SIGNAL
LEARN
CODE
CODE
LEARN
SET
SET
OPEN
FORCE
CLOSE
CODE
LEARN
LIMIT
MANUAL
or
PROGRAM
SET
–
+
PROGRAM
SET
–
+
PROGRAM
SET
–
+
HOLD 2 seconds
RADIO
SIGNAL
LEARN
CODE
RADIO
SIGNAL
LEARN
CODE
Programming the Opener
FOR MULTIPLE DOORS ONLY
–
CONTINUE BELOW.
THIS IS AN EXAMPLE ONLY. ENTER YOUR OWN PIN IN STEP 3.
THIS IS AN EXAMPLE ONLY. ENTER YOUR OWN PIN IN STEP 1.
THIS IS AN EXAMPLE ONLY. ENTER YOUR OWN PIN IN STEP 1.
A.
B.
Proceed to Step 2 on the next page.
Proceed to Step 2 on the next page.
GO DIRECTLY TO THE “For multiple doors only” SECTION ON PAGE 3.
®