The Crestron®
Horizon™ in-wall keypad features the following:
l
infiNET EX® Wireless Communication to Crestron Gateway
(CEN-GWEXER)
l
Field replaceable, engravable button caps available in various sizes (not
supplied)
l
Provides multiway functionality
The HZ-KPEX controls Crestron devices such as lighting, shading, and A/V
equipment from a single location. The device offers the following rating:
l
Line Power: 120 VAC, 50/60 HZ, 30 mA (requires neutral wire )
l
DC Power: 60 VDC, 30 mA (requires SolaHD® SDP™ 1-48-100T power
supply, not included)
WARNING:
Do not use the REM terminal when the HZ-KPEX is
powered by 60 VDC.
NOTE:
When wiring the device for 60 VDC operation, ensure that the
polarity is correct. C (positive) to the NEU terminal and -
(common) to the HOT terminal.
In the Box
1
HZ-KPEX, Horizon™ In-Wall Keypad with infiNET EX®
Wireless Communication, 120 VAC
Additional Items
2
Screw, 6-32 x 1 in., Truss Head, Combo (2054883)
1
Spacer, Multi-Gang Alignment (2049924)
1
Nut, Wire, Red (2053634)
NOTE:
Faceplates are not included. Refer to the
faceplates for more information.
Important Notes
WARNING:
To avoid fire, shock, or death, turn off the power at the
circuit breaker or fuse and test that the power is off before wiring!
NOTE:
When using the HZ-KPEX as a multiway controller, all 3- or 4-
way switches in a multi-way circuit must be replaced by HZ-AUX units
or HZ-KPEX units with a single HZ-DIMEX, HZ-DIMUEX, or HZ-SWEX
unit installed at the load side of the multi-way chain.
NOTES:
Observe the following points.
l
Codes: This product should be installed and used in accordance with
appropriate electrical codes and regulations.
l
Installation: This product should be installed by a qualified electrician.
l
Wiring: Use copper wire only. For supply connections, use wires rated
for at least 75° C (167° F).
l
Temperature: For use where temperatures are between 32° to 86° F
(0° to 30° C).
l
Electrical Boxes: Devices mount in standard electrical boxes. For easy
installation, use 3-1/2 in. (89 mm) deep electrical boxes. Several
devices can be installed in one electrical box (multigang). For a
smooth appearance, one-piece multigang faceplates (not supplied)
must be installed. When installing into a multigang box, do not fully
tighten the devices to the box until the faceplate has been aligned.
l
Switches: Mechanical 3- or 4-way switches do not work with
HZ-KPEX keypads.
1
HZ-KPEX
Quick Start
Horizon™ In-Wall Keypad with infiNET EX® Wireless Communication, 120 VAC
