75.5892.03 KEYPADS 20171013
Page 1 of 5
10KEYPADU & 10KEYPADUSL
1
2
3
3
4
4
1
2
75.5892.03 KEYPADS 20171013
Page 1 of 5
2 Specifications
USER’S GUIDE
STANDALONE ACCESS CONTROL KEYPAD
1 Description
BEA keypads 10KEYPADU and 10KEYPADUSL (slimline) offer
field-proven reliability and cost-effective solutions anywhere
access control is desired.
BEA keypads are waterproof and dustproof with IP66
protection rating. Keypads allow for up to 1010 users (zone 1:
1000 users, zone 2: 10 users), and incorporate a tamper alarm
and a doorbell feature as standard options.
These are ideal for integration into security systems with
electromagnetic locks, electric strikes, restricted access
elevators, or gates and other types of equipment requiring on/
off or momentary control inputs.
All programming is completed entirely from the keypad.
DESCRIPTION
SPECIFICATION
Supply voltage:
12 – 24 VAC/VDC (
DO NOT EXCEED 30VDC or 24VAC
)
Standby current:
≤ 30 mA
Working current:
≤ 160 mA
Max user codes:
1010 ( zone 1: 1000 users, zone 2: 10 users)
Relock time:
0 – 99 seconds
Output:
2 relays (free of potential change-over contact)
Max. contact voltage: 42 VAC/VDC
Max. contact current: 1 A (resistive)
Max. switching power: 30 W (VDC) / 48 VA (VAC)
Cable length:
3 ft
Operating temperature:
-22 – 158 °F
Operating humidity:
0 – 95% (non-condensing)
IP rating:
IP66 (waterproof and dustproof)
Dimension:
10KEYPADU:
3.0” (W) x 4.7” (H) x 0.9” (D) – (76 mm x 120 mm x 22 mm)
10KEYPADUSL:
1.7” (W) x 5.9” (H) x 0.95” (D) – (44 mm x 150 mm x 24 mm)
Certification:
CE, RoHS
Backlight:
Blue keypad illumination
3 Precautions
Shut off all power before attempting any wiring procedures.
Maintain a clean & safe environment when.
Constantly be aware of pedestrian traffic around the door area.
Always check placement of all wiring before powering up to insure moving door parts will not catch any wires and cause
damage to equipment.
Ensure compliance with all applicable safety standards and building codes upon completion of installation.
1. Mode LED
2. Door LED
3. Matrix keypad
4. Case screw
(bottom of case)
WARNING:
Product will be damaged and warranty will be voided if supply voltage exceeds 30VDC or 24VAC. This product shall not be
used with a BEA part number 1024VAC transformer or any standard, non-regulated 24VAC transformer as the measured
voltage exceeds 24 VAC.
