Protegus SK130LED –
User
‘s Quick Reference guide
Touchpad Overview
SLEEP mode touch key
STAY mode touch key
BYPASS function touch key
Power supply indication /
Function touch key
Zone status indication.
Indicators [1]–[16] correspond to zones 1–16.
ON
– zone not ready to arm
OFF
– zone is ready to arm
Flashing
– zone/user chosen
Flashing frequently
– zone was alarmed
System status indication
.
OFF
On
– system is disarmed
ARM
On
– armed in ARM
STAY
flashing
– armed in SLEEP
ARM On + STAY flashing
– armed in STAY
BYP
On
+
zone indicator On
– particular
zone is bypassed
MEM
On
– system was alarmed
TRB
On
– system fault
Setting of brightness and
volume of indication
Arming and Disarming
Arming in ARM mode:
1.
Make sure all zones are closed (all zone
indicator lights must be off).
2.
Enter your
User
code.
3.
Leave the premises during Exit Delay
countdown.
After entering User code, indicator ARM will
flash during time countdown.
Arming in SLEEP mode:
(Perimeter is protected only. Roaming inside is
allowed. Entering the premises will cause instant
system alarm):
1.
Press [ ].
2.
Enter your
User
code.
3.
Do not open exit doors.
When system arms in SLEEP mode, indicator ARM will
light up, while indicator STAY will start flashing.
Arming in STAY mode:
(Perimeter is protected only. Roaming inside is
allowed. Entering the premises will cause
Enter Delay
countdown for entering
User
code to disarm):
1.
Press [ ].
2.
Enter your
User
code.
When system arms in STAY mode, ARM and STAY
indicators will light up.
To Disarm:
Enter your
User
code.
When system disarms, indicator OFF will turn
on whereas indicators of all arming modes will
turn off.
To delete entered symbols or command, press [ ].
To delete event history, hold down [ ] for 3 seconds. When indicator MEM will start flashing,
press [ ] once more.
