Keypad Programming
Remote Programming
(Recommend using a Landline phone)
N56 W24720 N. Corporate Circle Sussex, WI 53089
800-451-1460 262-246-4828 (fax) www.rathmicrotech.com
06/15
Made in the USA
3 Year Warranty
RP8200910
Revision 6
Step 1. Begin Program Mode
A. Press
Enter
Step 2. Program Emergency Numbers
A. Press
1, Enter,
(Phone Number),
Stop
To Program numbers 2-5, repeat Step 2 a.
Step 3. Program Location Message
A. To Turn On Message Press
1, 3, Enter, 2
B. Press
6, Record,
(Wait for the Beep, Speak Your
Message),
Stop
(To Replay Message Press
6, Play/Pause
)
C. Program Frequency of Message Press
1, 3, Enter, _
0
= Turn Message Off
1
= Plays Message (1) Time
2
= Plays Message (2) Times (Default)
3
=
Plays Message Until Receiving Party Presses * On Their Phone
Step 1. Begin Program Mode
A. Call Into Phone
B. After 1st Simulated Ring Press
#, #
C. Key in Security Code (Default is
1111
)
Step 2. Program Emergency Numbers
A. Press
1, *
(Phone Number),
*, #
Step 3. Program Location Message
Program Talk Timer (Default is 5 minutes, ring down is 3 minutes)
Keypad:
Press
8, Enter, (3 Digit Number in Minutes)
Ex: 2 Minutes = 002
Note: After Talk Timer Expires, Phone Will Prompt Called
Party to Extend Call for 3 Minutes
Step 4. To Exit Program Mode
A. Press
*, #, 0
(You Will Hear Beep, Beep)
*, #
(Detailed Programming Instructions)
Standard Operations
SmartPhone VI
Phone Line Check (Default is 10 minutes)
Keypad:
Press
3, 4, Enter, (4 Digit Number in HH:MM)
Ex: 20 Minutes = 0020; 10 Hours = 1000
SmartPhone VI Consolidator Feature (Capability of 10 Phones/One Line)
A. Press
7, Enter
B. Press
*, 1-5
For Corresponding Elevator (1-5)
Step 1. Begin Program Mode
A. Press
Enter
Step 3. Program ID Numbers for Phones 6-10
A. Press
7, Enter
B. Press
#, 1-5
For Corresponding Elevator (6-10)
Step 2. Program ID Numbers for Phones 1-5
Step 5. Confirm Consolidator Operation
A. Dial Phone Number SmartPhones connected to:
All Phones Will Answer
B. To Select Individual Phone
Step 4. Program Emergency Numbers
A. Press
Stop
For 3 Seconds
Press
*1
(Phone #1) Press
#1
(Phone #6)
Press
*2
(Phone #2) Press
#2
(Phone #7)
Press
*3
(Phone #3) Press
#3
(Phone #8)
Press
*4
(Phone #4) Press
#4
(Phone #9)
Press
*5
(Phone #5) Press
#5
(Phone #10)
Press
*0
(All Phones)
A. To Turn On Message Press
1, 3, *, 2
B. Press
6, *,
(Wait for the Beep, Speak Your Message),
#
(To Replay Message Press
6, #
)
C. Program Frequency of Message Press
1, 3, *, _
0
= Turn Message Off
1
= Plays Message (1) Time
2
= Plays Message (2) Times (Default)
3
=
Plays Message Until Receiving Party Presses * On Their Phone
Remote:
3, 4, *, (4 Digit Number in HH:MM)
Step 4. To Exit Program Mode
A. Press
Stop
For 3 Seconds
Note: Consolidator mode allows you to have up to (10) SmartPhones on a single telephone line and toggle between
them from an outside call.
Example: To Program Emergency Number 2,
Press
2, Enter,
(Phone Number),
Stop
Note: If installed on a ring down line (no dial tone) do not
program a phone number. Press the following
1, 9, Enter, 2
(automatically sets the timer for 3 minutes)
To turn off press:
2 3 Enter 3 2 3 Enter 7284 1 1 Enter 2
To Program numbers 2-5, repeat Step 2 a.
Example: To Program Emergency Number 2,
Press
2, *
,
(Phone Number),
*, #
Note: If installed on a ring down line (no dial tone) do not
program a phone number. Press the following
1, 9, * , 2
(automatically sets the timer for 3 minutes)
To turn off press
2 3 * 3 2 3 * 7 2 8 4 1 1 * 2
For a Pause press “ # , ”
*
Optional Programming Features
Remote:
8, * , (3 Digit Number in Minutes)
Press
Press
Note: Called party can replay message by pressing
* , *
