4
Mounting Keypad
DO N
OT
Resetting PIN
If you have forgotten your PIN or you fear it may have
f
allen into
unauthorized hands
,
you must erase the old programming
.
Program
k
ey
U
p
/D
o
w
n
k
ey
"Setting
Up
a
Pin"
"Programming"
Changing
Y
our PIN
Program key
Program key
T
empora
r
y PIN
Program key
Program key
NO
TE:
The tempora
r
y PIN is autom
a
tically cancelled whenever you
enter your normal PIN after the tempora
r
y PIN is set.
NO
TE:
Unlike “
Restting PIN
,” You DO NOT need to reprogram
your opener after
changing
your PIN.
Replacing Batteries
HOLD
HOLD
THIS IS AN EXAMPLE ONLY. ENTER YOUR OWN PIN IN STEP 3.
THIS IS AN EXAMPLE ONLY. ENTER YOUR OWN PIN IN STEP 1.
THIS IS AN EXAMPLE ONLY. ENTER YOUR OWN PIN IN STEP 1.
THIS IS AN EXAMPLE ONLY. ENTER YOUR OWN TEMPORARY PIN IN STEP 1.
THIS IS AN EXAMPLE ONLY. ENTER YOUR OWN NEW PIN IN STEP 2.
Additional Genie
®
products can be ordered through your local GENIE
®
Professional Dealer
.
T
o locate a dealer near you–call 800-OK-GENIE.
If the first five digits of your serial number
f
all between 10289 and 11188 contact Genie for assistance 800-354-3643.
38320501866
FCC and IC CERTIFIED
This device complies with FCC Part 15 and Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular situation. If this equipment does cause harmful interference to radio or television reception, which may be determined by turning the
equipment OFF and ON, the user is encouraged to try and correct the interference by one or more of the following measures: (a) Re-orient or relocate the receiver antenna, (b) Increase the
separation between the opener and receiver, (c) Connect the opener into an outlet on a circuit different from that to which the receiver is connected, and (d) Consult your local dealer. Any
modifications or changes to this equipment which are not expressly approved by the manufacturer could void the users authority to operate the equipment.