Paradox K641, Quick Start

Page: 1 / 2

K641L-EQ00 05/2011
K641/K641LX LCD Keypad
Quick Start
How to Arm
Arming When Exiting (Regular/Force Arm)
To arm your system when exiting:
Arming When Staying (Stay/Instant Arm)
To arm your system when staying:
Overview
K641LX shown
LCD (displays system
status and messages)
Arrow keys (use to scroll the
menu options)
AC light (ON = power ON;
OFF = power OFF)
Status light (ON = zones closed
OFF = zones open
Flash = exit delay)
RX/TX logo (K641LX only)
Enter key (saves current data
and exits current menu)
ACC key (press for 2 seconds to
perform an action without
entering an access code)
Clear key (erases current data entry
or reverts to preceding step)
Step Description
1. Enter your [
ACCESS CODE
].
• To Regular arm, press the [
ARM
] key (arms entire
area when all zones are closed).
• To Force arm, press the [
FORCE
] key (arms entire
area without waiting for all zones to close).
2. Select the desired area or press the [0] key for
all areas.
Step Description
1. Enter your [
ACCESS CODE
] .
• To Stay arm, press the [
STAY
] key (arms area’s
perimeter only, which allows you to remain in the
protected area).
• To Instant arm, press the [5] key (stay arms the area
but an alarm will occur instantly any zone opens)
2. Select the desired area or press the [0] key for
all areas.