3
Up/Down key
Up/Down key
Up/Down key
NOTE:
Pressing any key will stop or start the opener while the door is in
motion
.
The door will automatically stop fully open or closed
.
When the
door has stopped moving
,
pressing on any single button will activate door
until backlight goes off (30 seconds).
NOTE:
Rapid blinking of the red LED on the Powerhead indicates an error
.
When the blinking stops
,
you must start programming steps over
.
Up/Down key
Up/Down key
Up/Down key
MUST
MUST
NOTE:
Pressing any key will stop or start the opener while the door is in
motion
.
The door will automatically stop fully open or closed
.
When the
door has stopped moving
,
pressing on any single button will activate door
until backlight goes off (30 seconds).
NOTE:
Rapid blinking of the red LED on the Powerhead indicates an error
.
When the blinking stops
,
you must start programming steps over
.
Programming the Opener
(Continued other side)
r
e
n
e
p
O
r
e
n
e
p
O
Opener
Opener
or
or
Opener
YOU MUST BEGIN AGAIN AT
“PROGRAMMING THE OPENER” —
FOR EACH DOOR.
For multiple doors only
(continued)
(continued)
THIS IS AN EXAMPLE ONLY. ENTER YOUR OWN PIN IN STEP 2.
THIS IS AN EXAMPLE ONLY. ENTER YOUR OWN PIN IN STEP 1.
Using
The Keypad
Up/Down key
For multiple doors only
Up/Down key
Mounting Keypad
The keypad MUST be mounted within sight of the garage door(s)
at least 5 feet ab
o
ve the floor and
c
lear of a
n
y m
o
ving door part.
W
all
1/8"
Screw
head gap
THIS IS AN EXAMPLE ONLY. ENTER YOUR OWN PIN IN STEP 1.
or
or
THIS IS AN EXAMPLE ONLY. ENTER YOUR OWN PIN IN STEP 1.