Genie CCTV Raptor II Ruggedized PTZ Скачать руководство пользователя страница 4

Страница: 4 / 48

Genie Raptor Manual Ver. 3.1

Edition. GN-April-2013

1. Introduction

This unit is designed to provide clear video images, even in extreme conditions. A robust mechanism,

allied with the latest technology, offers excellent auto-focus during PTZ operations. Exact location control,

following preset programmed operations, high-speed zoom and auto focus capabilities for shooting

moving objects, are just some of this camera’s features. The flat window and over 700TVL provide a vivid

picture quality, and the zoom interlocked Target IR LED technology gives outstanding performance when

monitoring night time environments; it also features 512x Super WDR.

Long-distance objects are easily distinguished with the outstanding performance of the Sony 36x Optical

and 32x Digital Zoom; total Power Zoom capability of 1152x. The IR models have x2 High Intensity

“Target” Infra-Red LED’s that fully integrate with the camera’s 36x zoom module, giving extremely detailed

images at night time. During a zoom operation the LED coverage changes proportionately with the zoom

of the camera. The angle of LED coverage goes from 60 degrees at its widest part to 6 degree at its

narrowest. This minimises light pollution and eliminates IR illumination of unimportant areas. Medium to

long range targets become the true focal point for the camera lens and the LED’s. There is also a built-in

and adjustable de-fog function which enhances images in foggy or misty environments.

Features

• 1/4” Sony Super HAD CCD

• Powerful Night Vision - up to 100m in Ideal Conditions – IR Models Only

• Target IR LED’s (IR angle 6~60 degrees; synchronised with the optical zoom ratio) –

IR Models Only

• Embedded and Adjustable Defog and Image Enhancer

• 512x Wide Dynamic Range (WDR)

• 2D and 3D DNR (Digital Noise Reduction)

• 36x Optical Zoom and 32x Digital Zoom – total 1152x Power Zoom capability

• 360 Degree Endless Panning

• Wide Tilt Range of -25~205 Degrees

• True Day/Night with IR Cut Filter

• 128 Presets and Tour Function

• DIS (Digital Image Stabiliser)

• Integrated Heater/Blower for -40°C and +60°C Operation

• High Performance & Low-Noise Wiper, with Anti-Abrasion Soft Silicon Rubber

• Hydrophobic Surface Coated Flat Glass

• Anti-Corrosion, Anti-Saltwater Powder Coated Surface Finish

• Auto Digital Flip

• 8 Privacy Zones

• IP68 Rated

• Upright and Pendant Installation Mounting Option.

Содержание Raptor II Ruggedized PTZ

















































Результаты поиска

Содержание Raptor II Ruggedized PTZ

Отзывы:

Похожие инструкции для Raptor II Ruggedized PTZ

Бренды по названию

Популярные бренды

Genie CCTV Raptor II Ruggedized PTZ, Инструкция по эксплуатации

Результаты поиска

Содержание Raptor II Ruggedized PTZ

Отзывы:

Похожие инструкции для Raptor II Ruggedized PTZ

Бренды по названию

Популярные бренды