Genie CCTV Raptor II Ruggedized PTZ, Инструкция по эксплуатации

Страница: 29 / 48

29 Genie Raptor Manual Ver. 3.1 Edition. GN-April-2013
2.6 DAY & NIGHT
1. MODE AUTO / COLOUR / BW
2. DELAY 5~60 SECONDS
3. THRESHOLD 1~29
4. GAP 1~5
5. BURST ON / OFF
6. IR LED ANGLE AUTO / 60.0°~6.0°
7. EXIT
• MODE
AUTO ] Automatically turns to Colour during daytime and B/W at night.
COLOR ] Fixed in Colour mode. IR’s are OFF.
BW ] Fixed in BW mode. IR’s are ON.
• DELAY
Set the switching time from B/W to Colour and from Colour to B/W; necessary for stabilisation.
• THRESHOLD
AGC level in Day & Night mode for turning from Colour to B/W. A higher threshold value
makes an earlier change from Day to Night at lower AGC levels (i.e. In brighter conditions).
• GAP
The gap level when switching between “Colour to B/W mode” and “B/W to Colour mode”.
• BURST
Output the BURST signal when switching to B/W mode.
• IR LED ANGLE
AUTO
]
IR LED ANGLE is controlled automatically according to the ZOOM ratio.
60.0 ] IR LED ANGLE is fixed at 60 degrees.
6.0 ] IR LED ANGLE is fixed at 6.0 degrees. This is useful for monitoring an object in the far
distance – must be more than 30 metres away.
Caution
If users set the IR LED ANGLE at 60/6, the IR LED ANGLE is fixed at a set point when AUTO
RUN is working; only used on models with integral IR LED’s.