Genie CCTV Raptor II Ruggedized PTZ Скачать руководство пользователя страница 38

Страница: 38 / 48

Genie Raptor Manual Ver. 3.1

Edition. GN-April-2013

3.4 PATTERN

A PATTERN is a memorised

1. PATT NUMBER

1~2

2. PATT DEFINE

OFF / ON

3. NAME

PATTERN001

4. PATTNAME DEF

OFF / <ON>

5. PATT RECORD

OFF / <ON>

6. PATT SPEED

2°,5,10,20°/S

7. EXIT

MENU Shift: UP, DOWN, LEFT & RIGHT KEYS

MENU Open: IRIS OPEN KEY

MENU Close: IRIS CLOSE KEY

PAN Shift: LEFT, RIGHT KEY

2. After moving to the desired position, press the IRIS OPEN KEY.

•

PAN END POS

This sets up the end position for the SCAN.

The method for setting up PAN END POS is the same as for PAN START POS.

•

TILT POS

This sets up the TILT angle in the SCAN.

Set up is similar to “PAN START POS” but the UP, DOWN keys should be used.

•

SCAN SPEED

Sets up the SCAN Speed.

The speed can be set between 2°/second (slow) ~ 20°/second (fast).

Caution

1. The values applied for WDR and ATW are those set on the OSD.

2. Set up angles of the initial and end location for the SCAN should not be over 180°.

3. Use AUTOPAN (A.PAN) for a continual PAN in SCAN.

4. If setting a SCAN with a TILT over 90°, PAN/TILT automatically moves to the position

-20°~90° and TILT is limited to 90°

PAN START POSITION

SET

PAN START POSITION

XXX

EXIT

IRIS CLOSE

Содержание Raptor II Ruggedized PTZ

















































Результаты поиска

Содержание Raptor II Ruggedized PTZ

Отзывы:

Похожие инструкции для Raptor II Ruggedized PTZ

Бренды по названию

Популярные бренды

Genie CCTV Raptor II Ruggedized PTZ, Инструкция по эксплуатации

Результаты поиска

Содержание Raptor II Ruggedized PTZ

Отзывы:

Похожие инструкции для Raptor II Ruggedized PTZ

Бренды по названию

Популярные бренды