GENEREX SYSTEMS Computervertriebsgesellschaft mbH - www.generex.de - 26
GENEREX Systems Inc. - www.generex.us
Configuration tip for large installations:
For larger systems, you may not be able to address all available modules at once, but they are needed the
same time. In automatic mode, you can first address modules 1 - 32 and later modules 33 - 64. With this
function, for example, you can comfortably prepare a module replacement at address range 145 - 197 If there
is an addressing error, the
WEBMANAGER
displays an error message and you can correct the affected mo-
dules individually by using manual mode.
4.2.2 Addressing
BACS Modules
via Manual Mode
This function allows precise configuration of BACS
module to provide the replacement of broken mo-
dules as well as adding one single module to the
existing configuration.
Please Ensure only one module is connected to
your Manager.
Entering address
Under „
Old
“, enter the current module address.
„
New
“ allows you to assign a new address to selec-
ted module.
„
Set
“ transfers the new address to the
selected BACS module.
BACS address searching tool
With this function, the BACS
WEBMANAGER
dis-
plays the address of an unknown BACS module.
Connect one single module to the manager and
press start.
Finding a BACS module on site
If you are looking for a single address on site, enter
the „
module ID
“ and click on
„Show“
. The module
will start blinking red and green until you press the
trigger button of the module itself.
Closing the
BACS programmer tool
„
Off
“ will close the BACS programmer and the
BACS
WEBMANAGER
will enable normal operatio-
nal mode and reboot your BACS System.
