GENEREX SYSTEMS Computervertriebsgesellschaft mbH - www.generex.de - 24
GENEREX Systems Inc. - www.generex.us
4.2 The integrated
BACS Programmer
The BACS Programmer Tool is an essential part of
the
BACS WEBMANAGER
.
1. Under „
Devices
“, open the „
BACS
“ submenu.
2.
Select the menu item „
Programmer
“.
3.
By pushing „
Enable Input Capability
“, BACS confi-
guration capability will be enabled:
Mit dieser Funktion schalten Sie folgende Funktio-
nen zur BACS-Konfiguration frei:
Audible Confirmation:
A signal tone confirms the BACS module button.
Automatic/Manual Mode:
Address your BACS-Modules.
BACS Address Search Tool:
Find BACS modules by address.
4.2.1 Addressing
BACS Modules
via Automatic Mode
Automatic mode allows automatic addressing of
modules. After each successful addressing, an
address is automatically incremented to prevent
duplicate addressing. If the
WEBMANAGER
should
provide audible feedback for each registered modu-
le, enable „
Automatic Mode
“.
„
Start Address
“ defines the first address to be
used, „
End Address
“ the last address to be assig-
ned.
Addressing example 1:
Start address is 1 and ends at address 35:
The BACS-Programmer will set up exactly 35 mo-
dules, starting at number 1.
Addressing example 2:
Start address is 76 and ends at address 89:
The BACS-Programmer will set up exactly 14 mo-
dules and assigns the dedicated address range from
76 up to 89.
Press „
Start
“ to begin.
