Generex BACS System, Быстрый старт

Страница: 17 / 28

GENEREX SYSTEMS Computervertriebsgesellschaft mbH - www.generex.de - 17
GENEREX Systems Inc. - www.generex.us
2. BACS WEBMANAGER Configuration
5
3
2
6
7
1
7
4
3
2
6
5
1
7
11
12
2
6
9 8
10
Alarm
Contact
4
Slot Version External Version
External Version
with integrated
BACS Bus Converter
12
BACSKIT_BSC4
BACSKIT_SCMB4
BACSKIT_LB4
BACSKIT_LMB4
BACSKIT_B4
3
Description Function
1 COM1 Port Connection with an UPS or another end device via the original RS232-cable.
2 COM2 Port Connection for optional devices like a modem, multi sensor SENSORMANAGER,
temperature sensor, humidity, field busses (MODBUS, RS232, Profibus, LONBus, etc.).
3 LAN Port Ethernet 10/100 Mbit interface with integrated LEDs
(green LED: connection to the network established, yellow LED: network-activity).
4 DC Input Power supply 12VDC/1A stabilized through external power supply,
DC-connector inside (-) minus, outside (+) plus.
5 COM3/AUX For the connection to the BACS® Bus Converter (at BUDGET 4 internal),
max.1m Rj12/6pole cable.
6
LEDs (red/green)
Operation Status WEBMANAGER Red LED Green LED
No Power  OFF  OFF
Booting  ON  OFF
Update in progress   flashing slowly  OFF
Update failure  
flashing fast

OFF
UPS Communication lost  ON  OFF
Operating  OFF   flashing slowly
7 Slide Switch
8 Alarm LED BACS-Alarm LED (green / red / yellow)
9 MUTE Button Button for the acknowledgement and mute of the horn. Alarm LED changes to yellow.
10 BACS Bus 2 x Rj10 interface to connect
BACS C-Module / SPLITTINGBOX / BACS_CSXXX / GX_R_AUX
11 BACS Service Port For connection to a PC/Laptop RS232-port, for addressing or readout the BACS modules via
BACS_Programmer or BACS_Reader Software directly (provided RS232 cable - DSub9 -> Mini-
Din8) .
12 RS485 Interface MODBUS variants: BACSKIT_SCMB4 and BACSKIT_LMB4
Toggles configuration and operation mode
Slide Switch middle position: Sets the BACS® WEBMANAGER BUD-
GET to the configuration mode. After cold boot/reboot the default IP ad-
dress 10.10.10.10 is active.
Slide Switch right position: DHCP is activated and an IP address is set
automatically. Check MAC address of your BACS WEBMANAGER to
locate according IP Address.
Slide Switch left position: Sets operational mode