GENERALTOUCH TECHNOLOGY CO., LTD
Issued by: Customer Service Department 17
/
22 Issued Date: 2013.10.14
发行部门：客户服务部
发行时间：
2013.10.14
(Protect the transducers of Zero-bezel touch screen,
保护零边框触摸屏换能器
)
At the three corners with transducers of Zero-bezel touch screen, in order to protect the transmission
of touch signal, please keep the protective areas clean without anything sticking both on front and back
surface. The protective area of back surface is the gray area with 45
°
solid lines as shown below, and
the corresponding area on the front surface also needs to be protected well. Please kindly refer to the
drawing of the Zero-bezel to get the size of the protective area.
在零边框触摸屏有换能器的三个角落，为了保护触摸信号的传递，请保持保护区域没有任何残留物，包
括触摸屏正面和背面。背面的保护区域是下图所示的灰色带
45
°斜实线的区域，相应的正面区域也需要
很好的保护。请参考零边框屏体的图纸来确定保护区域的尺寸。
(Protective areas of back surface of Zero-bezel touch screen,
零边框触摸屏背面的保护区域
)
As there is no front frame in the front to support the Zero-bezel touch screen, it is necessary to specially
design the supporting structure to prevent the touch screen slipping down. The picture below shows an
application case, the circular metal frame around the touch screen is designed to support the touch screen.
At the three corners with transducers, please keep a clearance of 30x0.5mm between the touch screen
and supporting structure to guarantee the transmission of touch signal. At the other place, the supporting
structure can contact the touch screen directly but should not place any pressure to the touch screen. Also
please clean the area of reflection stripes and the edges of glass carefully after assembly.
由于零边框触摸屏的前面没有前框支撑，因此有必要设计支撑结构来防止触摸屏下滑。下图展示了一个应用
30mm
30mm
20mm
20mm
Background Area,
背景色区域
Transducer,
换能器
Transducer,
换能器
Protective Area,
保护区域
Touch Screen
触摸屏
Touch Screen
触摸屏
Transducer,
换能器
Structural
Parts,
结构件
Transducer,
换能器
≥
30mm
≥
30mm
≥
9mm
