The
MODEL 10-510 & 10-510CF Dust Collector
has been designed to capture remove and collect non-metallic
dust and wood dust around the workshop and from woodworking machinery. This machine is designed for a con-
tinuous duty rating for industrial applications.
BASIC INSTRUCTIONS
The unit is supplied with a MAGNETIC SAFETY SWITCH
designed to protect the unit and the user from power
surges, power outages and unwanted or unintentional
start-up.
The switch assembly is equipped with a GREEN “Start”
BUTTON and a RED spring loaded “STOP” button.
Once the RED “STOP” BUTTON has been pressed, the
machine can only be started by turning the BLACK
inner part of the button to the right to release the stop
button.
MAGNETIC SWITCH
TO START THE MACHINE:
Release the
RED STOP BUTTON
and then press the
GREEN START BUTTON
.
TO STOP THE MACHINE:
Push on the
RED STOP BUTTON
and wait for the motor
to come to a complete stop.
When you have finished using the machine be sure to
unplug the machine from the power source or turn off
the power at the wall panel or circuit breaker.
ON/OFF SWITCH
MAINTENANCE, SERVICING AND LUBRICATION
This machine operates on
220 V single phase power (M1 model only)
; if you suspect any electrical problems call
a qualified electrician to do the verification of the electrical circuit or the machine. If you need further help with your
dust collector contact your
General® International
distributor or call our
Technical Support at (514) 326-1161
.
Make sure the switch is in the «OFF» position and unplug the unit from the power source and flip the
breaker to «OFF» position at the wall panel before performing any maintenance.
13
MAGNETIC SWITCH
DÉMARREUR MAGNÉTIQUE
START
BUTTON
STOP
BUTTON
Turning the black part to right will release stop button
