1. Fit the clear plastic collector bags over the bottom
openings on the drums and use the hooks on the
drums to temporarily hold the bags in place.
Use caution and wear gloves when handling
metal parts such as the belt clamps, which can
cut if handled carelessly.
ASSEMBLE AND ATTACH THE UPPER BAG SUPPORT ROD:
(MODEL 10-510 ONLY)
Connect the upper bag support rod to the bag
hanger with the 1/4” x 1/2” hex head bolts (2 per rod).
Mount the assembled bag hanger onto the metal rod
located at the top of the collector body and attach it
by using 1/4” x 1/2” hex head bolts.
bag hanger
upper bag
support rod
FIT THE COLLECTION BAGS TO THE DRUMS
2. Use the belt clamps to hold the bags securely on
the drum. Before tightening down the belt clamp
make sure the metal strap is sitting in the groove on
the lower portion of the drum.
11
FIT THE FILTER BAGS TO THE DRUMS:
(MODEL 10-510 ONLY)
1. Slip a belt clamp through the opening in the bot-
tom of each filter bag until it comes out through the
hole at the other end.
2. Hook the top loop of the filter bags over the hook
on the bag hangers,
A
.
3. Fit the filter bags over the top edge of the drums
and use the belt clamps to secure the bags on the
drum,
B
. Before tightening down the belt clamp
make sure the metal strap is sitting in the groove
on the upper portion of the drum.
hook
A
B
