4
ELECTRICAL CONNECTION/DISCONNECTION:
ELECTRICAL CONNECTION
Both a manual circuit breaker or similar device as well
as an electrical plug are recommended and should
be installed by a qualified electrician. Use locally
approved wire that includes a separate grounding
wire, and a 3 prong grounding type plug with match-
ing receptacle.
ELECTRICAL DISCONNECTION
Be sure to disconnect this machine from the power
source whenever maintenance, adjustments, or servic-
ing is req
ui
red.220 V Single-Phase 10-510 M1 & 10-510CF
M1 operate on power only.
Note: Voltage requirements and amperage draw for
M2 & M3 3-phase motors may not be fully described
in this manual. For complete electrical requirements,
refer to the motor I.D. name plate on the machine. If in
doubt, consult a licensed, qualified electrician before
proceeding.
AMPERAGE DRAW
CIRCUIT REQUIREMENTS:
Only connect your machine to a circuit using wiring
and a circuit breaker that are capable of handling the
amperage draw from your machine, as well as any
other machines that could be operating on the same
circuit. If you are unsure, consult a qualified electrician
before proceeding.
GROUNDING INSTRUCTIONS:
IN THE EVENT OF AN ELECTRICAL MALFUNCTION OR
SHORT CIRCUIT, grounding reduces the risk of electric
shock. This tool is equipped with a power cord that has
a grounding wire, which must be properly connected
to the grounding prong on the plug; likewise, the outlet
must be properly installed and grounded. All electrical
connections must be made in accordance with local
codes and ordinances.
EXTENSION CORDS:
The use of an extension cord is not recommended on 220V
equipment.
Before connecting the machine to the power
source, verify that the voltage of your power sup-
ply corresponds with the voltage specifed on the
motor I.D. nameplate. A power source with great-
er voltage than needed can result in serious injury
to the user as well as damage to the machine. If
in doubt, contact a qualified electrician before
connecting to the power source.
Never connect the machine to a power source with
greater voltage than needed. Failure to comply
could result in serious injury to the user and/ or dam-
age to the machine.
Electrocution, fire or damage to the machine could
result if this machine is not grounded correctly or if
your electrical configuration does not comply with
local municipal and state or provincial codes and
regulations. Ensure compliance by consulting with a
licensed and qualified electrician.
MODEL 10-510 & 10-510CF
MOTOR
HP
VOLTAGE
PHASE
AMPERAGE
M1
5
220 V
1 PH
34 A
M2
5
220 V
3 PH
15 A
M3
5
600 V
3 PH
6 A
ELECTRICAL REQUIREMENTS
