background image

Model Code

Attachable Blade

Cut Depth

Weight

Cutting Material

Dust Bag capacity

Proper Grinders

 -1-

  

BOSCH

MAKITA

HITACHI

 

  

NK-125
INSTRUCTION MANUAL

WARNING

OVERVIEW

SPECIFICATIONS

・The supplied connecter may not connect securely to disc grinders. In this case, do not use TORNADO.
・TORNADO is for use when cutting concrete, stone and brick. Do not use when cutting metal or other materials.
  Do not use with any other type of cutter, such as a grindstone or tipped saw.
・Always check TORNADO for damage, cracks or deformation before use.
  Do not use TORNADO which is damaged, cracked or bent as this could lead to injury.
・Be sure to wear protective goggles, a dust mask, protective footwear, earplugs and other protective equipment when working.
・Keep TORNADO away from gasoline, thinner, petroleum and paraffin.
・Hold the workpiece with clamping devices.

[a] Main Unit  [b] Dust Bag  [c] B-Connecter  [d] M-Connecter
[e] H-Connecter  [f] M4 Screw  [g] Cup Washer  [h] Spacer (T4.5)
[ i ] Spacer (T7.3)  [ j ] Spacer (T9.4)  [k] Spacer (T12.6)  [m] Base Flange
[n] Foot Plate  [p] Flat Screw  [q] Wrench  [r] Setscrew

PREPARATION

WARNING

Guard

SW

Take the Guard off.
Remove the Screws.
Turn the Grinder Body to locate the SW upper position.
Tighten the Screws.

CONNECTER INSTALLATION

[c] B-Connecter

[d] M-Connecter

[e] H-Connecter

[a] Main Unit

[f] M4 Screw

[g] Cup Washer

Choose the proper connecter and fit it to [a] Main Unit
with [f] M4 Screw and [g] Cup Washer.

・Be sure to turn off the disc grinder and remove the plug from the electrical outlet before attaching TORNADO.
・If you attach TORNADO to a disc grinder but the connector is loose and cannot be securely attached, do NOT use TORNADO.
 Using it in this state could lead to injury.

a

b

c

d

e

h

i

j k

p

n

m

N300129

f g

GWS6-115/GWS7-115(E)/
GWS8-115/GWS8-125/
GWS9-125/GWS10-125/
GWS11-125CI(E)/GWS14-125CI(E)(T)/
GWS15-125CIH(CIEH)(CITH)

9554NB/9558NB/GA4530/9565CV
G12SS/G12SR3/G13SR3/
G13SB3/G13SE2

BOSCH:

MAKITA:
HITACHI:

GWS8-115/GWS8-125
GWS10-125/GWS11-125CI
GWS14-125CI(E)(T)
GWS15-125CIH(CIEH)(CITH)

GWS6-115
GWS7-115
GWS9-125

GWS8-115/GWS8-125/GWS10-125/
GWS11-125CI/GWS14-125CI

Remove O-Ring
if it is equipped.

O-Ring

NK-125

125mm/T1.5-2.2 Diamond Blades.

5-30mm

520g (Main Unit)

Concrete, Block, Stone, Tile, ..etc.

Should be epmtied with every 3m of cutting.

q

r

Содержание Tornado NK-125

Страница 1: ...ate p Flat Screw q Wrench r Setscrew PREPARATION WARNING Guard SW Take the Guard off Remove the Screws Turn the Grinder Body to locate the SW upper position Tighten the Screws CONNECTER INSTALLATION c B Connecter d M Connecter e H Connecter a Main Unit f M4 Screw g Cup Washer Choose the proper connecter and fit it to a Main Unit with f M4 Screw and g Cup Washer Be sure to turn off the disc grinder...

Страница 2: ...t the Blade on m Base Flange 5 Set the Wheel Nut on the Blade Be care of the direction of Wheel Nut 6 Fix the spindle and tighten the Wheel Nut 7 Confirm NO contact between the Blade and inner area of the Main Unit Spindle Knob Bolt WARNING Make sure TORNADO is securely attached otherwise it may come loose causing injury Wheel Nut direction BOSCH OTHERS a Main Unit GWS8 115 GWS8 125 GWS9 125 GWS10...

Страница 3: ...from the opening 4 Do NOT use worn out blade otherwise the dust collection performance should be dropped off 5 Confirm that the fastener of the Dust Bag is securely closed 6 Do NOT wash the Dust Bag b Dust Bag Insert deeply Duct Base CUTTING DIRECTION Rotating direction CUTTING WITH CLEANER Surely connect Cleaner Hose to the duct of Main Unit then turn Grinder Cleaner on and start cutting CAUTION ...

Страница 4: ... projecting of Gear Case of the Grinder beyond the bottom surface 1 Complete the installation of Grinder and Blade 2 Loosen the Knob Bolt 3 Set the Main Unit on n Foot Plate 4 Tighten Knob Bolt 5 Tighten p Flat Screws from the bottom surface with the Front Guide matched with the groove of the Foot Plate CAUTION Blade Change and Depth Adjustment is impossible when using with Foot Plate Connect Dust...

Отзывы: